cable cervicom self supported drop cable cpr

External self-supported drop cable for aerial installation as an external connection cable, from the distribution cable to the subscriber.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cable Cervicom Self-supported Drop Cable CPR
~\ImgCli\FOTO2_1700.jpg
External self-supported drop cable for aerial installation as an external connection cable, from the distribution cable to the subscriber.
No propagador de la llama
Resistente UV
Instalaciones aereas
Construction
1. Conductor
Bare copper wire
Diameter: 0,60mm
2. Insulation
Solid high density polyethylene
Identification:
· 1 pair: White, Yellow
· 2 pares: White, Green, Yellow, Red
3. Supporting element
Side galvanised steel supporting element
Composition: 7x0,40 mm
Tensile strength: 1500 N
4. Composition
· 1 pair: Twisted pair
· 2 pairs: Star quad
5. Outer sheath
PVC (UV Resistant)
Colour: Black
Technical characteristics
1. Conductor resistance
65 Ohm/Km Max.
2. Resistance unbalance
Max. value: 2%
3. Insulation resistance
8000 MOhm*Km
4. Mutual capacitance
52 ± 6 nF/km Max.
5. Dielectric strength
Cond-Cond: 3600 V
6. Nominal attenuation (dB/100m)
0.8 kHz: 1.10 dB/km
1.5 kHz: 1.60 dB/km
3.0 kHz: 2.30 dB/km
40 kHz: 4.5 dB/km
96 kHz: 6.0 dB/km
1 MHz: 19 dB/km
7. Operating Tª
-25°C to +70°C
8. Min. bending radius
10xD
Standards / Properties
1. Ref. standard for drawing
Telefónica GT.ER.f5.051
2. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)
3. CPR Classification (Euroclass)
Eca
(According to UNE-EN 50575)