cat 6 cable cervicom data sftp lshf cpr

Shielded Category 6 halogen free data transmission cable for local area networks (LAN) in fixed installations, both dry and wet.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cat. 6 - Cable Cervicom DATA S/FTP LSHF CPR
~\ImgCli\FOTO2_1324.jpg
Shielded Category 6 halogen free data transmission cable for local area networks (LAN) in fixed installations, both dry and wet.
Protegido electromagneticas
No propagador de la llama
Libre halogenos
Humos baja opacidad
Baka corrosividad gases
Construction
1. Conductor
Bare copper wire
Diameter: 0,56 mm (AWG 23)
2. Insulation
FoamSkin PE (Foam polyethylene)
Diameter: 1,38 mm
3. Composition
Two insulated conductors twisted together as a pair
4. Pair Screen
Aluminium/Polyester tape in "S" shape helically applied on two pairs covering each of them individually
5. Assembly
4 shielded pairs laid up together
6. Overall screen
Tinned copper wire braid
7. Outer sheath
Halogen free compound
Colour: Azul
Technical characteristics
1. Outer diameter
6,9 mm
2. Weight
49 Kg/Km
3. Operating Tª
Fixed installation: -20°C to +60°C
During installation: 0°C to +50°C
4. Min. bending radius
Fixed installation (without load): 4xD
During installation (with load): 8xD
5. Loop resistance
154 Ohm/Km Max.
6. Resistance unbalance
2% Max.
7. Insulation resistance
2000 MOhm*Km Min. (500V)
8. Mutual capacitance
Nominal 43 pF/m (at 800Hz)
9. Capacitance unbalance
1500 pF/Km Max. (Pair-Ground)
10. Characteristic Impedance
100 ± 5 Ohm (at 100 MHz)
11. Velocity of propagation
79%
12. Propagation delay
Nominal 427 ns/100m
13. Test Voltage
1000 V (DC, 1 min)
14. Transfer Impedance
Max. 12 mOhm/m (at 1 MHz)
Max. 10 mOhm/m (at 10 MHz)
Max. 30 mOhm/m (at 30 MHz)
15. Coupling attenuation
80 dB
16. Segregation class
"d"
Standards / Properties
1. Ref. for construction/drawing
EN 50173-1; EN 50288-5-1
ISO/IEC 11801; IEC 61156-5
TIA/EIA-568-c.2
IEEE 802.3at
2. Flame Retardant
UNE-EN 603332-1 (IEC 60332-1)
3. Halogen free
UNE-EN 60754-1 (IEC 60754-1)
4. Low corrosivity
UNE-EN 60754-2 (IEC 60754-2)
(pH >= 4,3 ; conductivity =< 10µS/mm)
5. Low smoke emission
UNE-EN 61034 (IEC 61034)