Offering high-tech products and solutions for the cable and communications industry since 1975

Shielded Cable Cervitronic POS 250 V

Flexible data transmission cable for use in instrumentation systems of industrial processes in fixed installations. Specially recommended when a good electromagnetic protection as well as a good autonomy of each of the pairs is required thanks to the individual shielding on each of them.

See only CPR
See by cable type
Screened cable Cerviflex YSLCY-JZ/-OZ 300/500V CPR
Shielded Cable Cerviflam HSLCH -JZ/OZ 300/500V
Shielded Cable Cerviflex RC4V-K 300/500V CPR
Screened Cable Cerviflex RC4V-K 1000V CPR
Screened Cable Cervipar PAR POS 300/500V CPR
Shielded Cable CERVIPAR PAR POS 300/500V FRLSHF
CY 500 V Cable Cervipar
Shielded Cable Cervitronic LiYCY 250V CPR
Shielded Cable Partronic LiYCY (TP) 250V
Shielded cable Cervitronic Z1C4Z1-K 250V
Shielded Cable Cervitronic POS 250 V
Screened cable Cervitronic PAR 250V
Shielded Cable Cervitronic PAR POS 250V
Shielded cable Cervitronic PAR POS 250V LSHF
Screened Cable Cervilene POS CY 250V
Cable Shielded Cerviflex VC4V-K 300/500V CPR
Shielded Cable Cerviflex VC4V-K 0,6/1kV CPR
Screened Cable Cerviflam RC4Z1-K 300/500V CPR
Shielded Cable Cerviflam RC4Z1-K 0,6/1 kV CPR
Shielded cable Cerviflam Z1C4Z1-K 300/500V CPR
Shielded cable Cerviflam Z1C4Z1-K 0,6/1 kV CPR
Shielded cable Cerviflam Z1C4Z1-K (AS) 300/500V CPR
Shielded cable Cerviflam Z1C4Z1-K (AS) 0,6/1kV CPR
Shielded Cable CERVIPAR POS 500V CPR
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Shielded Cable Cervitronic POS 250 V
~\ImgCli\FOTO2_170.jpg
Flexible data transmission cable for use in instrumentation systems of industrial processes in fixed installations. Specially recommended when a good electromagnetic protection as well as a good autonomy of each of the pairs is required thanks to the individual shielding on each of them.
Protegido electromagneticas
No propagador de la llama
Construction
1. Conductor
Flexible tinned copper wires
2. Insulation
PE (Polyethylene)
Identification: See attached colour table
3. Composition
Twisted pairs laid up together (15-20 turns/m Min.)
4. Screen
Aluminium/polyester tape + flexible tinned copper drain wire
Overlap: 25%
Coverage: 100%
5. Outer sheath
PVC (Polyvinyl chloride)
Colour: Grey (Similar to RAL 7032)
Technical characteristics
1. Operating voltage
250 V
(Not to be used for direct connection to main power network or other low impedance sources)
2. Test Voltage
1000V
3. Capacitance
100 pF/m Max.
4. Operating Tª (conductor)
-15°C to +70°C
5. Min. bending radius
8xD
Standards
1. Ref. standard for drawing
Based on UNE 212016
2. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)