Cable Extraflexible Cerviflex CHAIN PEPUR C HF

Shielded power and control cable designed for use in industrial processes. Extraflexible and with high resistance to abrasion and flexion in dynamic installations, especially recommended for use in cable chains when good electromagnetic protection is required. Likewise, du to its UV radiation, ozone, and humidity resistance, the cable can also

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cable Extraflexible Cerviflex CHAIN PE/PUR-C HF
~\ImgCli\FOTO2_520.jpg
Shielded power and control cable designed for use in industrial processes. Extraflexible and with high resistance to abrasion and flexion in dynamic installations, especially recommended for use in cable chains when good electromagnetic protection is required. Likewise, du to its UV radiation, ozone, and humidity resistance, the cable can also be used in outdoor applications.
Suitable for use in the food industry. Special polyurethane outer jacket resistant to cleaning and disinfection agents typically used in the food and beverage industry. (Requirements obtained through certification tests carried out by ECOLAB).
Protegido electromagneticas
No propagador de la llama
Libre halogenos
Hidrocarburos
Flexible
Desina
Cadenas portacables
Baka corrosividad gases
Resistente aceites
Resistente agua
Resistente UV
Resistente ozono
Construction
1. Conductor
Extra flexible bare copper wires
Class VI Acc. to UNE-EN 60228
2. Insulation
Polyolefin (UL-CSA Standards)
Identification: Black numbered + yellow/green (Beginning from 3 conductors. Two conductor cables, without yellow/green).
3. Assembly
Insulated conductors laid up together.
Non-woven textile tape casing over the assembly
4. Overall screen
Tinned copper wire braid
Coverage: 85%
+ eventually, non-woven textile tape
5. Outer sheath
PUR (Polyurethane, UL-CSA Standards)
Colour: Grey (Similar to RAL 7040) according DESINA
Technical characteristics
1. Operating voltage
300 V : Cross sectional areas from 0,5mm² (AWG21) to 1,0mm², inclusive. (AWG18)
1000 V : Cross sectional areas > 1,0mm² (AWG18)
2. Test Voltage
2000 V : Cross sectional areas from 0,5mm² (AWG21) to 1,0mm², inclusive. (AWG18)
3000 V : Cross sectional areas > 1,0mm² (AWG18)
3. Operating Tª (conductor)
-40°C to +90°C
4. Min. bending radius
Fixed Installation: 5xD
Dynamic installation:
· From 0,5mm² to 16mm²: 7,5xD
· > 16mm²: 10xD
Standards / Properties
1. Reference standards
UL File No: E83517
According NFPA 79-2018 Chapter 12.9
According UL 758, UL 1581 y CSA 22.2 210.2
· Sections from 0,5mm² (AWG21) to 1,0mm² (AWG18): UL 90°C 300V, Style 21209 - CSA AWM I/II A/B 90°C 300V
· Sections > 1,0mm² (AWG18): UL 90°C 300V, Style 21209 - CSA AWM I/II A/B 90°C 300V
2. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1), UL VW-1, CSA FT1


3. Halogen free
UNE-EN 60754-1 (IEC 60754-1)
4. Low corrosivity
UNE-EN 60754-2 (IEC 60754-2)
(pH >= 4,3 ; conductivity =< 10µS/mm)
5. Oil and hydrocarbon resistant
UL 1581, VDE 0472 part 803 A/B
6. Water resistant
UL 1581, IEC 60811