Screened Cable Cervilene POS CY 250V

Screened low capacity cable for data transmission in industrial processes where protection against electromagnetic interference is required. Suitable for protocols using as a physical layer: RS-232, RS-422 or RS-485 with the impedance specified in this document.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Screened Cable Cervilene POS CY 250V
~\ImgCli\FOTO2_888.jpg
Screened low capacity cable for data transmission in industrial processes where protection against electromagnetic interference is required. Suitable for protocols using as a physical layer: RS-232, RS-422 or RS-485 with the impedance specified in this document.
Protegido electromagneticas
No propagador de la llama
Flexible
Construction
1. Conductor
Flexible bare tinned copper wires
2. Insulation
Foam polyolefin
Identification: DIN 47100
3. Assembly
Twisted pairs laid-up together
Pair lay length:
Paso de pareado:
· 0,22mm2: 18/20 turns/meter Min.
· 0,50mm2: 12/15 turns/meter Min.
4. Overall screen
Aluminium/polyester tape + flexible tinned copper drain wire
Coverage: 100%
+
Tinned copper wires braid
Overlapp: 60%
5. Outer sheath
PVC (Polyvinyl chloride)
Colour: Grey (Similar RAL 7032)
Technical characteristics
1. Operating voltage
250 V
(Not suitable for direct connection to the main electrical network as a power cable)
2. Test Voltage
1000 V
3. Operating Tª (conductor)
-15°C to +70°C
4. Mutual capacitance
45 pF/m Aprox.
5. Characteristic Impedance
100 Ohm ± 20%
6. Insulation resistance
>1000 MOhm*Km
Standards / Properties
1. Ref. standard for drawing
Based on UNE 212016
2. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)