Cable Cerviflam Marine XTCuZ1 K AS 061kV

Screened flexible power and control cable for fixed installations in ships and offshore units. Especially recommended when a good fire performance is required and the integrity of the circuit must be guarantee in case of fire

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cable Cerviflam Marine XTCuZ1-K (AS+) 0,6/1kV
~\ImgCli\FOTO2_1379.jpg
Screened flexible power and control cable for fixed installations in ships and offshore units. Especially recommended when a good fire performance is required and the integrity of the circuit must be guarantee in case of fire
Resistente fuego
Protegido electromagneticas
No propagador de la llama
No propagador incendio
Libre halogenos
Humos baja opacidad
Flexible
Baka corrosividad gases
Resistente UV
Construction
1. Conductor
Flexible bare copper wires
Class V Acc. to UNE-EN 60228
2. Insulation
Mica tape + HF XLPE-90°C (IEC 60092-360)
Identification: See attached table
3. Composition
Insulated conductors laid up together
4. Inner covering
Halogen-free compound compatible with others components.
*From 25mm2 (included) the inner covering will be extruded
5. Armour
Tinned copper braid wire
6. Outer sheath
Halogen-free compound SHF1 (IEC 60092-360)
Colour: Orange
Technical characteristics
1. Operating voltage
600/1000V
2. Operating Tª (conductor)
Operation: -15°C +90°C
(Up to -40°C in fixed and protected installation)
During installation: 0°C
Short-circuit: 250°C (5s Max.)
3. Min. bending radius
6xD
Standards / Properties
1. Ref. standard for drawing
IEC 60092-353
2. Flame Retardant
IEC 60332-1
3. Fire Retardant
IEC 60332-3-22(Category A)
4. Halogen free
IEC 60754-1
5. Low corrosivity
IEC 60754-2
(pH >= 4,3 ; conductivity =< 10µS/mm)
6. Low smoke emission
IEC 61034 (Transmittance >60%)
7. Fire resistant
IEC 60331-21
8. UV resistant
EN 50618