Offering high-tech products and solutions for the cable and communications industry since 1975

Wiring cable Cerviflex H07V K CPR

Unsheathed single core cables with flexible conductors cables for fixed installations. According to the Low Voltage Regulation REBT 2002. Installation in ducts (above ground or embedded) or similar closed systems. They are also suitable for protected fixed installations, lighting and command and control switchgear for voltages up to 1000V (inclusive)AC

See only CPR
See by cable type
Control Cable Cerviflex VV-F 500V CPR
Cable Cerviflex H05VV-F 300/500V CPR <HAR>
Cerviflex VV-K 0,6/1 KV CPR
Wiring cable Cerviflex H05V-K
Wiring cable Cerviflex H07V-K CPR
Wiring cable Cerviflex H05V-K SN
Wiring cable Cerviflam H05Z1-K (AS)
Wiring cable Cerviflam H07Z1-K (AS) CPR
Cable Cerviflex YSLY-JZ/-OZ CPR
Cable Cerviflex YSLY-JB/-OB CPR
Cable Cerviflam HSLH -JZ/-OZ
Cable PUR Cerviflex H05BQ-F <HAR>
Cable PUR Cerviflex H07BQ-F <HAR>
Connection Cable Cervicord H07V-R CPR
Cerviflex Wiring V-250V
Cable Cerviflam Z1Z1-F 300/500V
Cable Cerviflam Z1Z1-K 0,6/1kV CPR
Cable Cerviflam Z1Z1-F (AS) 300/500V CPR
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Wiring cable Cerviflex H07V-K CPR
~\ImgCli\FOTO2_224.jpg
Unsheathed single core cables with flexible conductors cables for fixed installations. According to the Low Voltage Regulation REBT 2002. Installation in ducts (above ground or embedded) or similar closed systems. They are also suitable for protected fixed installations, lighting and command and control switchgear for voltages up to 1000V (inclusive)AC or up to 750V with respect to ground in DC.
No propagador de la llama
Flexible
Construction
1. Conductor
Flexible bare copper wires
Class V Acc. to UNE-EN 60228
2. Insulation
PVC (Polyvinyl chloride)
Identification: Colours (See attached table)
Technical characteristics
1. Operating voltage
450/750 V
2. Test Voltage
2500 V
3. Operating Tª (conductor)
Fixed installation: -15°C to +70°C
During installation and handling: +5°C
Shor-circuit (Max. 5seg): +160°C
4. Min. bending radius
4xD (Diameter <= 8 mm)
5xD (Diameter <= 12 mm)
6xD (Diameter > 12 mm)
Standards / Properties
1. Ref. standard for drawing
UNE-EN 50525-2-31
2. CPR Classification (Euroclass)
Eca
(According standard UNE-EN 50575)
3. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)