ICT - Shielded Cervicom LSHF CPR | Cervi electrical cables

$~\ImgCli\FOTO2_836.jpg$

Multi-pair shielded telephone cable for distribution and dispersion networks for subscribers according to Real Decreto 401/2003 on ICT cables. Suitable for indoor installations where no halogen emission in case of fire is required

ICT - Shielded Cervicom LSHF CPR

Construction

1. Conductor

Bare copper wire
Nominal diameter: 0,5mm

2. Insulation

PE (solid polyethylene)
Identification: Colour code

3. Composition

Twisted pairs laid up together

4. Overall screen

Aluminium/polyester tape + drain wire
Coverage: 100%

5. Outer sheath

Halogen free compound
Colour: Grey

Technical characteristics

1. Conductor resistance

98 Ohm/Km Max.

2. Resistance unbalance

2,5% Max.

3. Insulation resistance

5000 MOhm*Km Min. (500V, 20°C)

4. Mutual capacitance

55 nF/km Medium Max.
58 nF/km Max.

5. Capacitance unbalance

Max. value pair-pair: 260 pF/km (Max. individual)

6. Dielectric strength

Cond-Cond: 500 V
Cond-Screen: 1500 V

7. Attenuation (dB/Km)

1,30 dB/km at 800 Hz
2,52 dB/km at 3 kHz
8,3 dB/km at 150 kHz
21,4 dB/km at 1 MHz

8. Operating Tª (conductor)

-15°C to +70°C

9. Min. bending radius

10xD

Standards / Properties

1. Reference standards

ICT Real Decreto 346/2011

2. CPR Classification (Euroclass)

Dca-s2,d2,a2
(According to UNE-EN 50575)

3. Flame Retardant

UNE-EN 60332-1 (IEC 60332-1)

4. Halogen free

UNE-EN 60754-1 (IEC 60754-1)

5. Low smoke emission

UNE-EN 61034 (IEC 61034)

ICT Shielded Cervicom LSHF CPR

Multi-pair shielded telephone cable for distribution and dispersion networks for subscribers according to Real Decreto 401/2003 on ICT cables. Suitable for indoor installations where no halogen emission in case of fire is required