cable cervicom alarm screened cpr

Shielded cable for security systems (alarms) and intercommunication applications, when some protection against electrical noise is required.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cable Cervicom Alarm Screened CPR
~\ImgCli\FOTO2_2250.jpg
Shielded cable for security systems (alarms) and intercommunication applications, when some protection against electrical noise is required.
Protegido electromagneticas
No propagador de la llama
Flexible
Construction
1. Conductor
Flexible bare copper wires
Cross-sectional area:
· Power: 0,60mm2
· Signal: 0,20mm2
2. Insulation
PVC (Polyvinyl chloride)
Identification:
· Power: Red, Black
· Signal: Colours (See attached table)
3. Composition
Insulated conductors laid up together
4. Screen
Aluminium/polyester tape + tinned copper drain wire
5. Outer sheath
PVC (Polyvinyl chloride)
Colour: White
Technical characteristics
1. Operating voltage
250V
(*Not suitable for direct connection to the power supply network or other low impedance sources)
2. Test Voltage
1000 V
3. Conductor resistance
· Power (0,60mm2): 32,5 Ohm/Km
· Signal (0,20mm2 ): 108 Ohm/Km
4. Insulation resistance
10 MOhm*Km
5. Operating Tª
-15° to +70°C
Standards / Properties
1. CPR Classification (Euroclass)
Eca
(According to UNE-EN 50575)
2. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)