Offering high-tech products and solutions for the cable and communications industry since 1975

Cable Cervicom EAP Pairs Outdoor Telephone CPR

Cable for distribution networks in outdoor installations.

See only CPR
See by cable type
Cable Cervicom Unshielded Interf LSHF CPR
ICT - Shielded Cervicom LSHF CPR
Cable Cervicom EAP Pairs Outdoor Telephone CPR
Cable Cervicom EAPSP Pairs Armoured Telephone CPR
Interior ICT Onslaught
Cable Cervicom Reinforced Drop CPR
Cable Cervicom Self-supported Drop Cable CPR
Cervicom ADU Drop Cable Indoor/Outdoor
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cable Cervicom EAP Pairs Outdoor Telephone CPR
~\ImgCli\FOTO2_1683.jpg
Cable for distribution networks in outdoor installations.
Protegido electromagneticas
Resistente agua
Resistente UV
Construction
1. Conductor
Bare copper wire
Diameter: 0,40 / 0,51mm /0,64mm /0,91mm
2. Insulation
PE (Polyethylene)
Identification: Colour code
3. Composition
Twisted pairs laid up together.
(Units of 12, 13 or 25 pairs with identifier thread)
*Eventually, an additional pair (pilot pair) in white[plus] black may be available.
4. Overall screen
Aluminium/copolymer tape, longitudinally applied, overlapped an glued to the outer sheath
5. Outer sheath
PE (Polyethylene)
Colour: Black
Technical characteristics
1. Conductor resistance
· 0.40mm: 144.2 Ohm/Km Max.
· 0.51mm: 98 Ohm/Km Max.
· 0.64mm: 58 Ohm/Km Max.
· 0.91mm: 29.2 Ohm/Km Max.
2. Resistance unbalance
Max. average value: 56 nF/km
Max. value: 58 nF/km
3. Insulation resistance
5000 MOhm*Km Min. (100-500 Vcc)
4. Mutual capacitance
Max. average.: 58 nF/km
Max. value: 58 nF/km
5. Capacitance unbalance
Max. average value pair-pair: 45 pF/km
Max. value pair-pair: 260 pF/m
Max. average value pair-ground: 650 pF/km
Max. value pair-ground: 2625 pF/m
6. Dielectric strength
· Cond-Cond: 2500V (0,40mm) / 3000V (0,51mm) / 3600V (0,64mm) / 4500V (0,91mm)
· Cond-Screen: 5000V (0,40mm) / 5000V (0,51mm) / 10000V (0,64mm) / 10000V (0,91mm)
7. Nominal attenuation (dB/100m)
· 0.8 kHz: 1.64 (0,40) / 1.30 dB/km (0,51) / 1.04 dB/km (0,64) / 0.74 dB/km (0,91)
· 1000 kHz: 27.1 (0,40) / 21.4 dB/km (0,51) / 17.5 dB/km (0,64) / 12.8 dB/km (0,91)
8. Far end crosstalk
Min. average at 1 MHz:
46.2 dB/305 m (0,51) / 46.5 dB/305 m (0,64) / 48.2 dB/305 m (0,91)
9. Crosstalk
Min. average at 1 MHz: 45.2
10. Operating Tª (conductor)
-15°C a +70°C
11. Min. bending radius
12xD
Standards / Properties
1. Reference standards
IEC 60708-1, IEC 60708-3
ICT Real Decreto 401/2003 (*Only 0.51mm cables)