Cable Servo motors Cerviflex PE/PUR-C (Power)

Shielded power and control cable for use in industrial processes where good electromagnetic protection is required, particularly suitable for servomotors. Extra flexible and highly resistant to abrasion and bending, suitable for use in dynamic installations (cable chains). The cable can also be used in outdoor applications, due to its resistance to UV radiation, ozone and humidity.
Suitable for use in the food industry. Special polyurethane outer jacket resistant to cleaning and disinfection agents typically used in the food and beverage industry. (Requirements obtained through certification tests carried out by ECOLAB).

Construction

1. Conductor

Extra flexible bare copper wires
Class VI Acc. to UNE-EN 60228

2. Insulation

Polyolefin (UL-CSA Standards)
Identification:
Black cores marqued U/L1/C/L+, V/L2, W/L3/D/L- + Yellow/Green

3. Assembly

Insulated conductors laid up together with eventual fillers in the interstices + nonwoven tape

4. Overall screen

Tinned copper wire braid
Coverage: 85%
+ eventually, nonwoven tape

5. Outer sheath

PUR (Polyuethane, UL-CSA Standards)
Colour: Orange (Similar to RAL 2003) according to DESINA

Technical characteristics

1. Operating voltage

1000 V

2. Test Voltage

4000 V

3. Operating Tª (conductor)

-40°C to +90°C

4. Min. bending radius

Fixed Installation: 5xD
Dynamic installation:
· From 0,5mm² to 16mm²: 7,5xD
· > 16mm²: 10xD

Standards / Properties

1. Reference standards

UL File No: E83517
De acuerdo a NFPA 79-2018 Chapter 12.9
De acuerdo a UL 758, UL 1581 y CSA 22.2 210.2
UL 90°C 1000V, Style 21209 - CSA AWM I/II A/B 90°C 1000V

2. Flame Retardant

UNE-EN 60332-1 (IEC 60332-1), UL VW-1, CSA FT1

3. Halogen free

UNE-EN 60754-1 (IEC 60754-1)

4. Oil and hydrocarbon resistant

UL 1581, VDE 0472 part 803 A/B

5. Water resistant

UL 1581, IEC 60811

Cable Servo motors Cerviflex PEPUR C Power